FacebookYouTubeLinkedIn

motor winder

Sawmill DC Motor

Last summer, we received a call from the maintenance manager of a large sawmill. To get an idea of equipment size, this large bandsaw cuts 6’ diameter tree trunks into quarter pieces. A large carriage carries the log and feeds it into a large bandsaw with a blade that is 12” wide. The quarter pieces then go to smaller saws to cut slab boards. The complaint was that the large DC mill motor was making noise. Our field service supervisor, Jim Delawder, investigated and found that the banding on the commutator end of the armature had fractured and was flopping against [...]

Sawmill DC Motor2022-01-28T17:14:56-05:00

Complex Motor Rewind – DC Mill Motor

Horner Louisville had the opportunity over the Holidays to service a customer who is a plastics extrusion company. The motor came in on an overtime basis, so it was given top priority. The customer sent in a 75Hp FUJI DC Motor that, after disassembly, inspection and testing required a full rewind and machine work that included coatings work on the armature. However, this wasn’t your every day run of the mill DC motor. The motor was a random wound compound design which is known to be a little tricky to wind. Louisville’s winder, Charlie Mings, looked at the winding and was [...]

Complex Motor Rewind – DC Mill Motor2022-01-28T15:33:09-05:00

13200 V 2000 HP Vertical Motor

Can you even imagine how many 60,000,000 gallons a day of water looks like? A good-sized bath would hold 40 gallons and a million gallons would be 25,000 baths. A water utility company recently sent in a 13,200V, 2,000 HP Vertical Motor to be rebuilt. Due to Capital Improvement programs the city and the Preventative Maintenance Team said this motor was due for a rebuild. This motor supplies energy for a 60,000,000 gallon a day vertical pump pumping potable water to the city. This facility has been going strong along the Ohio River since 1860. This was a total rewind on [...]

13200 V 2000 HP Vertical Motor2022-01-28T15:24:28-05:00

Finish Ball Mill Motor

A 1350 HP Synchronous Motor out of a cement plant in Ohio was called out to bid and Horner won that bid. This finish mill motor comes out of a cement plant in the ball mill. The ball mill is a big round pipe that is full of steel balls the size of a softball. As the pipe turns it has blades welded on the inside which carry the balls up to the top of a 16-foot diameter pipe and the balls fall to the bottom of the pipe where the rocks are. The weight of the balls smash the rock [...]

Finish Ball Mill Motor2022-01-28T15:09:16-05:00

Horner Named GE Wolong Approved Repair Center

GE Industrial Motors, (GE-Wolong), has granted Horner Industrial the rights to conduct Warranty repair on their Motor Product line. Horner Industrial and GE have had a long-standing relationship over the years. When the GE Motor line was sold to Wolong over two years ago our long-standing relationship with GE was severed and our Warranty status was put into limbo. Horner Industrial is proud to announce that effective October 1, 2021, GE Industrial Motors has once again reinstated Horner Industrial as an approved Warranty Repair Center for their product line. This will allow Horner Industrial the opportunity to work directly with GE [...]

Horner Named GE Wolong Approved Repair Center2022-01-26T23:32:36-05:00

University Flood and VFD Protection

Recently, a larger University in Indiana suffered a flood in the Main Campus Library. During a large rain event, they had (2) 75hp motors with grounding rings exposed to water in the small basement mechanical room. Upon checking stock, delivery of new motors equipped with an internal grounding brush would be 5 to 6 weeks. As the motors are being operated by VFD’s, the customer wanted some form of protection against common mode current which could lead to bearing fluting and motor failure. Horner Salesperson Joseph Motz took the opportunity to present the Cool Blue and NaLA inductive absorbers to the [...]

University Flood and VFD Protection2022-01-26T22:56:39-05:00

Want To Know More About Our Services And Products?

Sign up for our mailing list and get this FREE knife by mail.

Your Business Address(Required)
This field is for validation purposes and should be left unchanged.

International users and vendors prohibited. We will only mail to a business address, no residential addresses.
This information will never be shared with a third party.

Go to Top