FacebookYouTubeLinkedIn

2000 hp

13200 V 2000 HP Vertical Motor

Can you even imagine how many 60,000,000 gallons a day of water looks like? A good-sized bath would hold 40 gallons and a million gallons would be 25,000 baths. A water utility company recently sent in a 13,200V, 2,000 HP Vertical Motor to be rebuilt. Due to Capital Improvement programs the city and the Preventative Maintenance Team said this motor was due for a rebuild. This motor supplies energy for a 60,000,000 gallon a day vertical pump pumping potable water to the city. This facility has been going strong along the Ohio River since 1860. This was a total rewind on [...]

13200 V 2000 HP Vertical Motor2022-01-28T15:24:28-05:00

5,000KVA Transformer Failure

An Iron and Metal Recycling Facility, Located in Dayton, Ohio called and had a transformer fail and was asking for help. I contacted Don Morris to asked for his assistance. Between Don and Mike Butler, we decided to get Springfield Field Service involved. Jim Delawder and I were to make a site visit, collect photos and information to feed back to Don for evaluation. Dan Sneary showed up on site and did a temporary repair to get the transformer back on-line. In the meanwhile, Matt Velandingham was able to source a replacement transformer. The new transformer had a 50 working day [...]

5,000KVA Transformer Failure2021-01-10T17:16:22-05:00

Non Standard 2000 HP Mill Stand Motor

What makes the Horner Motor Division stick out from most motor shops besides the breadth of services it offers is its ability to fix and problem solve non-standard motors and equipment. We employ some of the best winders and mechanics whose knowledge is incomparable. We received a 2000 HP Mill Stand motor from an aluminum plant for repair. Fractures were found in the risers exiting the commutator bars with a design from Siemens that would definitely be considered “non-standard.” Many of the design characterizations were due to lots of horsepower in a fairly small frame. We replaced the commutator, windings, and [...]

Non Standard 2000 HP Mill Stand Motor2020-03-05T18:06:06-05:00

2000 HP DC Shredder Motors

A recycling scrapyard in Dayton, OH had a few problems with one of two 2000 HP DC motors. The outboard motor was going through brushes and they were having flash-over issues causing field coil damage. The 2 motors are coupled together to run a shredder that shreds anything from cars, and scrap iron, to office furniture etc. The customer’s spare motor was sent to our shop at Washington Street to make sure the motor was ready to go when it was switched out with the motor needing repair. Washington Street bought and installed a new coupling and then sent the motor [...]

2000 HP DC Shredder Motors2019-09-09T18:03:25-04:00

Want To Know More About Our Services And Products?

Sign up for our mailing list and get this FREE knife by mail.

Your Business Address(Required)
This field is for validation purposes and should be left unchanged.

International users and vendors prohibited. We will only mail to a business address, no residential addresses.
This information will never be shared with a third party.

Go to Top