Sawmill DC Motor

Last summer, we received a call from the maintenance manager of a large sawmill. To get an idea of equipment size, this large bandsaw cuts 6’ diameter tree trunks into quarter pieces. A large carriage carries the log and feeds it into a large bandsaw with a blade that is 12” wide. The quarter pieces then go to smaller saws to cut slab boards. The complaint was that the large DC mill motor was making noise. Our field service supervisor, Jim Delawder, investigated and found that the banding on the commutator end of the armature had fractured and was flopping against [...]

Sawmill DC Motor2022-01-28T17:14:56-05:00

Cement Plant Raw Mill Motors

A Cement Plant in Louisville decided to purchase a spare 4500 Hp motor for their Raw Mill to back up a motor that had been in operation for years. A Raw Mill is a piece of equipment used to grind up materials into a raw mix during the manufacture of cement. The raw mix is then fed to a kiln, which transforms it into clinker, which is then ground to make cement in the cement mill. The company did their due diligence and sought out quotes for a replacement motor. When all of the quotes came back, they were surprised at [...]

Cement Plant Raw Mill Motors2021-02-17T19:59:21-05:00

Title

Go to Top