POST
Manufacturing Plates Only Lasting A Few Weeks
A local concrete manufacturer came to us with a wear problem on their plates which are used to screen up to 300 tons per hour of raw product to size during the manufacturing process. The plates were only lasting a few weeks so they contacted Horner Coatings. Fan and Fabrication fabricated a new plate then it was sent back to us to be grit blasted and we bond coated the raw metal with an iron aluminum alloy which is made to go down coarse. This gives the wear material a better surface to bond with. Loctite 7332 and 7227 were the finishing coatings and we have not received the plates back and it has been well passed the couple weeks the parts were lasting before.
Other Posts
Chiller 1000HP Soft Starter
An ethanol facility that processes corn into fuel recently upgraded a critical chiller application with the installation of a 1000 HP, 4160V Benshaw medium-voltage soft starter. What began as a transformer repair discussion ultimately evolved into a full system improvement [...]
Combine Vibration Troubleshooting
Horner Field Service was recently asked to troubleshoot a vibration issue with a combine. The call came in to Ralph Coonce on a Thursday afternoon. It didn’t take long for Ralph to determine that he was going to send me. [...]
Rubber Plant Motor Failure
A 400HP WEG motor on the hydraulic power unit of a plant’s main mixer failed due to a catastrophic drive-end (DE) bearing issue. The bearing failure generated sparks and halted the production of raw rubber critical for automotive products. With [...]
