POST
Hardwood Manufacturer 50″ Fan
A hardwood flooring manufacturer contacted Horner about repairing a 50” Fan. With help from Indianapolis Field Service, Horner Fan and Fabrication had a 3 day window to repair this 50” fan wheel. This was the main dust collection fan for the plant. The structure around this fan made it very challenging to remove. The fan is inside the plant with structural steel above the fan and a concrete wall on two sides. After removing the insulation and the inlet fitting there was about 36” of space to maneuver this heavy wheel and 2-15/16” shaft out of the building. Once in the shop a new shaft was fabricated and all of the blades were repaired and beefed up. Then the wheel was balanced along with the new shaft. We were also able to locate and install (2) new 8 groove sheaves (not in the original scope) We got them back up and running on the 3rd day. The customer is very happy with the service Horner provided, great job to all involved in this project!
Other Posts
Chiller 1000HP Soft Starter
An ethanol facility that processes corn into fuel recently upgraded a critical chiller application with the installation of a 1000 HP, 4160V Benshaw medium-voltage soft starter. What began as a transformer repair discussion ultimately evolved into a full system improvement [...]
Combine Vibration Troubleshooting
Horner Field Service was recently asked to troubleshoot a vibration issue with a combine. The call came in to Ralph Coonce on a Thursday afternoon. It didn’t take long for Ralph to determine that he was going to send me. [...]
Rubber Plant Motor Failure
A 400HP WEG motor on the hydraulic power unit of a plant’s main mixer failed due to a catastrophic drive-end (DE) bearing issue. The bearing failure generated sparks and halted the production of raw rubber critical for automotive products. With [...]
