POST
Power Generation Plant Water Pump Motors
A coal fired power generation plant had a planned outage to maintain equipment and Horner was onsite to remove 2 1250HP vertical pump motors. These motors pull water from the reservoir for cooling purposes and heat exchangers. These motors were taken out for routine maintenance, basic reconditioning and to replace bearings. Onsite to help with the removal was Indianapolis Field Service Don Pence, Louisville Field Service Joe Dupont and Terre Haute’s Eddie Piper and Jeremy Brown. Crane service had to be scheduled and coordinated to pull the motors out. The bearings for these motors are specialized thrust bearings and were replaced at the Indianapolis Motor Shop along with the recondition. Indianapolis Field Service reinstalled the motors once they were done. Great work every one on getting these hard to remove motors out, repaired, and fast tracked back to the customer.
Other Posts
Chiller 1000HP Soft Starter
An ethanol facility that processes corn into fuel recently upgraded a critical chiller application with the installation of a 1000 HP, 4160V Benshaw medium-voltage soft starter. What began as a transformer repair discussion ultimately evolved into a full system improvement [...]
Combine Vibration Troubleshooting
Horner Field Service was recently asked to troubleshoot a vibration issue with a combine. The call came in to Ralph Coonce on a Thursday afternoon. It didn’t take long for Ralph to determine that he was going to send me. [...]
Rubber Plant Motor Failure
A 400HP WEG motor on the hydraulic power unit of a plant’s main mixer failed due to a catastrophic drive-end (DE) bearing issue. The bearing failure generated sparks and halted the production of raw rubber critical for automotive products. With [...]
