Horner Industrial Group
    Published
    May 6, 2024
    Location
    Job Type
    Address
    1521 E WASHINGTON ST

    Description

    TRANSFORMER WINDER

     

    Horner Industrial Services, Inc. is seeking experienced Transformer Winders for our Transformer Repair Division located in Indianapolis, IN. The primary duties include but are not limited to; the safe data collection and rewinding of various sizes and designs of dry type and water-cooled industrial transformers, and related electrical components. Brazing, soldering, and welding of copper, aluminum, steel, etc. Verification of applicable rewinds by core loss, TTR, rotational direction, meg-ohm, and similar testing. Documentation of pre & post testing data.

     

    Responsibilities of this role include:

    • Document the external data associated with the equipment or winding.
    • Diagnose and/or assess the equipment for malfunctions, failures or damage using diagnostic equipment such as megger, test panels and related equipment.
    • Dismantle equipment and collection internal data.
    • Identify and document internal winding data.
    • Convert internal winding data as applicable per EASA guidelines.
    • Remove old winding from core or bobbin.
    • Utilize available core test equipment and programs to determine core viability and proper heat dispersion.
    • Repair or modify existing core to meet test criteria.
    • Complete full or partial core re-stack, if necessary
    • Determine correct insulation of core and component parts applicable to the equipment Insulation Classification.
    • Correctly size and wind coils or wire applicable to insulated equipment.
    • Perform appropriate wire insertion, wedging and tying of winding or wire.
    • Perform connection sequence including equipment necessary for final soldering, brazing, or welding of internal coil leads to exterior leads.
    • Tie and proof end clearance of finished winding.
    • Perform and document final electrical and mechanical test results of the winding, insulation, and connections.
    • Apply the necessary fit, thread, and identification coating to allow the correct insulating varnish application.
    • Dip and bake winding, if applicable.
    • Clean up coated fits, threads, and identification plates of dip & baked winding.
    • Perform final testing and documentation, if applicable.
    • All other duties as assigned to support Company goals and objectives.

     

    Skills and experience desired:

    • High School Diploma or Equivalent.
    • A minimum of 1 to 3 years' experience in electrical / mechanical repair, motor shop servicing or completion of an accredited EASA or military training program.
    • Ability to work independently or as part of a team as applicable.
    • Requires diagnostic troubleshooting, disassembly, measurement, data collection, failure analysis, repair, re-assembly, testing and safety abilities at a skilled tradesman level.
    • Requires oral and written skills to effectively communicate with co-workers, shop staff, supervisors, and managers.
    • Organization skills
    • Troubleshooting and corrective action skills
    • Mechanical aptitude
    • Knowledge and understanding of ISO 9001 procedures.
    • Basic math
    • Percentages
    • Decimals
    • Conversion formulas
    • Must be able to perform essential function of the job, with or without reasonable accommodations.

     

    Horner offers a competitive wages, benefits package, and 401(k) Plan.  To learn more about us, visit our website at www.hornerindustrial.com   Resumes may be emailed to kelly.goode@hornerindustrial.com, or you may apply in person at 1521 E Washington Street – Indianapolis, IN  46201.  Horner Industrial Group is an Equal Opportunity Employer.

    Apply
    Drop files here browse files ...
    Up to 3 files can be added

    Related Jobs

    Electric Motor Winder   Springfield, OH
    October 25, 2017
    Electric Motor Winder   Indianapolis, Indiana
    May 16, 2017